★整個測試過程由微機控制自動完成，也可脫離微機工作。

★The whole test process is controlled by a microcomputer and completed automatically, or separated from the microcomputer to work.

★實驗過程中校正方便，直觀。

★The test process can be calibrated conveniently and intuitionally.

★測量結果可長期保存，可查詢、打印。

★Test results can be inquired, printed and stored for a long time.

★系統(tǒng)工作溫度用戶可通過軟件在600℃----1150℃之間選擇設定（測煤時為1050℃，測石油時用戶可選擇800℃）。

★Working temperature of the system can be set by the user and selected via a software at 600-1150℃ (1050℃ for the coal and 800℃ for the petroleum).

★微機與單片機系統(tǒng)之間采用標準RS232串行接口，具有接線簡單、傳輸可靠、傳輸距離遠、故障率低等特點。

★A standard RS232 serial interface is adopted between the microcomputer and singlechip, realizing simple connection, reliable transmission, far transmission distance and low failure rate, etc.

參數(shù)：

Parameters：

★硫的測量范圍：0~30% 。

★ Test range of sulfur: 0-30%;

★載氣流量：1000ml/min 。

★Carrier gas flow: 1000ml/min;

★測硫時間：3—9min，微機自動判斷控制。

★Test time: 3-9 min with automatic decision and control of microcomputer;

★升溫速度：20~45min。

★Heating rate: 20-45 min;

★電源要求：單相交流電壓~220V  50Hz, 功率  2KW 。

★Power supply: Single-phase three-phase AC voltage 220V  50Hz, power 2KW;

★準確度：符合國標GB/T214-2007。

★Accuracy: Conforming to international GB/T214-2007